Monday, April 14, 2008

Using Power Saver to reduce electrical consumption and stabilize voltage

I have an MS188 Power Saver plugged into a socket near to the circuit breaker box in my house. This small device is effective, SIRIM tested, and legal to use.



This device works by fine-tuning the electrical system in the house. The fine-tuning process reduces heat generation, reduces amperage and results in reduction consumption of electricity. It causes less waste of electrical energy while increasing the life of the inductive equipment in the house. It protects against power surges for up to 400 volts and increases the capacity to the electrical panel by making it run cooler.

It helps to save in electrical bills quite substantially by reducing power wastage. How? It achieves this by increasing the Power Factor, which is the ratio of working power (kW) to apparent power (kVA).

I use this device for the following 3 main purposes:
  1. Improve electrical efficiency and Power Factor, and hence reduce electrical bill charges.
  2. Provide baseline protection against surge and brown to all electrical appliances in the house.
  3. Stabilize the current and hence prolong the lifespan of electrical appliances in the house.
If you are interested with this Power Saver as well, click here for more info.

I notice it has a new look for the current version, slightly different from mine. The ads below shows its new look. You can place your order online there.

9 comments:

  1. Is it direct connect to 3 Pin Power Plug? Would it make a tedious installation?

    ReplyDelete
  2. Yes. For houses using single-phase power supply, just plug it in and on the switch. As simple as that.

    It would be a bit tedious if the house is having 3-phase power supply. You need to get 3 units of Power Saver, and plug 1 unit to each of the 3 separated distribution lines.

    ReplyDelete
  3. does it really save 10%- 20% every month? haha

    ReplyDelete
  4. Hi silv3ster,

    Sometimes is more than that.

    Well, I'm just sharing. Believe or not is totally up to you.

    ReplyDelete
  5. Hi,

    How much is your monthly electric bill before and after the Power Saver installation?

    Could you kindly describe the electrical items that you have and its daily usage?

    I was told that if the monthly bill is less than RM50, the power saving effect is minimal.


    Thanks!

    ReplyDelete
  6. Hi,

    Yes. Savings will be very minimal if your monthly consumption is low.

    ReplyDelete
  7. hi,

    clikc that website, it show

    "thank you for visiting our page. Our products and services are currently not available in your country."

    ReplyDelete
  8. Ya, Savings will be very minimal if your consumption is low.

    ReplyDelete
  9. I alsow using power saver for decrease electricity bill.

    ReplyDelete