Monday, September 16, 2013

TP-Link TL-WDR3600 dual band gigabit router now supports both TM Unifi and Maxis Home Fibre Internet

TP-Link TL-WDR3600 is an N600 wireless dual band gigabit router ranged in between the lower TL-WR1043ND N300 router and the higher TL-WDR4300 N750 router. Good news is, it now has official firmware for Malaysia that supports both TM Unifi and Maxis Home Fibre Internet.

At the price of RM17x (selling at All IT Hypermarket) which is just slightly higher than the price of TL-WR1043ND at RM14x, you get 2 major feature upgrades namely dual band WiFi (2.4GHz and 5GHz, 300Mbps each, can work simultaneously) and hardware NAT (providing faster WAN to LAN throughput). The TL-WDR4300 with 3 antennas is still selling at RM2xx.

I have made a table to compare this TP-Link TL-WDR3600 with the stock D-Link DIR-615 router of TM Unifi and stock Thomson TG784n router of Maxis Home Fibre Internet.


You might want to consider this TL-WDR3600 router if:
  • the D-Link/Thomson router that comes with your HSBB Internet service damaged and warranty period expired.
  • and/or you want to have much better WiFi experience (more stable connection, farther reach, and make use of the 5Ghz WiFi frequency band for your devices that support it).
  • and/or you want to have much faster wired gigabit connections between your devices in the LAN.
In order for your TL-WDR3600 to support TM Unifi or Maxis Home Fibre Internet connection, you need to download the latest Malaysia version firmware from TP-Link website and flash it to your router.

After the firmware upgrade, the firmware version becomes 3.13.32 Build 130723 Rel.9433n.

 
 
Setting up for Unifi or Maxis mode is pretty straightforward and easy. You just need to follow the step-by-step instruction in the Quick Setup function.


The Quick Setup function will help you configure the necessary VLAN settings for Unifi to enable both Internet access and IPTV.


You can also plug the network cable connecting to your IPTV set-top-box to LAN port other than LAN1, as long as you configure the LAN ports setting correctly.

For Maxis Home Fibre Internet, it will help you to configure the necessary VLAN settings to enable Internet access, VoIP and IPTV.



Note that you will lost the IPv6 feature in this router after you flashed it with Malaysian version of firmware. This should not be an issue as the Internet is still heavily using IPv4 now.

1 comment:

  1. I brought a TL-WDR4300 and set to maxis mode for my maxis home fiber. The internet access is working. But when i connect LAN4 (VLAN821) of WDR4300 to WAN port of maxis router. the VoIP is not working. Anyone can help?

    ReplyDelete