Tuesday, April 18, 2017

Instruction manual for S-Sport Coolboss 30m water resistant watch

I have bought an S-Sport Coolboss 30m water resistant watch for my small kid. This made in China watch cost only RM11 at online store.

It is splash proof but not water proof, which means it can resist rain water, but cannot be worn for diving.


This watch has 4 buttons:
  • L: Light
  • M: Mode
  • S: Start
  • R: Reset
It is pretty tricky to set the watch without referring to the instruction manual, and that manual is just a piece of paper.

I am copying down its important instruction here, just in case the paper cannot be found in the future. If you also have this watch (or similar Coolboss watches) and you lost its instruction manual, you can bookmark this page and come back to here for future reference.

Displaying the date:
  • In Normal Time mode, just press the "S" button to display current date.
Displaying the alarm time:
  • In Normal Time mode, just press the "R" button to show the alarm time currently set.
Switching time display between AM/PM and 24 hour mode:
  • In Normal Time mode, press "M" button 3 times to enter Time Adjustment mode.
  • Then, press "R" button 2 times to enter Hour Display Adjustment mode.
  • Press the "S" button to adjust the hour digit and the desired time display mode.
  • When finished, press "M" to return to Normal Time mode.
Adjusting the time:
  • In Normal Time mode, press "M" button 3 times to enter Time Adjustment mode.
  • When the second figure is blinking, press "S" to adjust the second value.
  • Press "R" to make the minute figure blinks, then press "S" to adjust the minute value.
  • Pressing "R" continuously will switch among the hour, day, month and weekday value to be adjusted. Use the "S" button to adjust the blinking figure.
  • Press "M" to return to Normal Time mode.
Setting the alarm time:
  • In Normal Time mode, press "M" 2 times to enter Alarm Adjustment mode.
  • Use the "R" button to toggle between hour and minute figure.
  • Use the "S" button to adjust the blinking figure.
  • Press "M" to return to Normal Time mode.
Using the stopwatch:
  • In Normal Time mode, press "M" 1 time to enter Stopwatch Function.
  • Press "S" button to start the stopwatch. Press "S" button again to stop the stopwatch.
  • Press "R" button to reset the stopwatch.
  • Press "M" to return to Normal Time mode.
Turn hourly chime on/off:
  • In Normal Time mode, press and hold the "R" button.
  • While holding the "R" button, press "M" button to toggle hourly chime on/off. When it is on, all the weekdays on top of the screen will have black background.
Turn alarm on/off:
  • In Normal Time mode, press and hold the "R" button.
  • While holding the "R" button, press "S" button to toggle alarm on/off. When it is on, the alarm indicator at the bottom will be shown.
Alarm snooze and stop:
  • When the alarm is chiming, press "S" button to snooze. The alarm will chime again after 5 minutes.
  • When the alarm is chiming, press "R" button to stop it.
Cold light lamp:
  • Press the "L" button, the cold light will be on for 3 seconds.
at

26 comments:

  1. UnknownFebruary 11, 2018 at 10:43 PM

    omg thx i was using a different watch and the instructions still worked wow

    ReplyDelete
  2. MartinMarch 11, 2018 at 6:01 PM

    Awesome. Thanks for this. I've been annoyed by the alarm fir a week, didn't know how to turn off

    ReplyDelete
  3. AnonymousOctober 2, 2018 at 5:03 AM

    my watch doesnt change any of the time on normal watch mode when following your instructions

    ReplyDelete
  4. KatarinahOctober 24, 2018 at 4:02 AM

    A lot of thanks! Also been annoyed by the alarm for a long time and couldnt figure out how to turn it off.

    ReplyDelete
  5. UnknownMarch 19, 2019 at 4:15 AM

    thanks!!

    ReplyDelete
  6. UnknownApril 12, 2019 at 8:07 AM

    Bookmarked!!!
    (Same instructions, different model)

    ReplyDelete
  7. UnknownApril 13, 2019 at 9:02 PM

    I can show the date and month, but how do I change the date? Help, please!

    ReplyDelete
    Replies
    1. Moon Girl 🧕🏻🌙✨April 15, 2019 at 8:14 PM

      Press M, or mode, 3 times. Then do the same with R, or reset. It should show you the date. To change the date, just press start until the correct day. For the month, press restart then start to change it. Press restart one more time to change the day of the week. (press start to change it). Sorry if this makes no sense, but it works for me. Hope you figure it out!

      Delete
  8. UnknownApril 14, 2019 at 5:12 PM

    Also, I've just discovered, if you hold the L button for more than 3 seconds, you can change the colour of the light! You can set this to Blue, Red, Green, Light blue, Yellow, or multicoloured!

    ReplyDelete
    Replies
    1. AbeMay 15, 2024 at 9:17 AM

      Thank you for this! Mine has violet as well!

      Can anyone tell me which size wrist band this watch uses? If like to replace the rubber wrist band with a canvas one. Thanks.

      Delete
  9. UnknownMay 19, 2019 at 12:04 AM

    Obrigada tenks

    ReplyDelete
  10. Tony maxxMay 28, 2019 at 6:11 PM

    best procedures ever...i was already being frustrated...but this procedures worded like magic...great thanks

    ReplyDelete
  11. tarzanOctober 2, 2019 at 3:53 PM

    Does anyone know where I can get a replacement buckle loop for my Honhx watch? That's the only problem I've had with the watch so far, the buckle keeps falling apart.

    ReplyDelete
  12. Andie GalDecember 5, 2019 at 8:08 AM

    Thank you for the instructions. My watch is stuck in Army time, how do I get it back to Normal time?

    ReplyDelete
  13. Voyager8December 5, 2019 at 9:51 AM

    @Andie Gal

    You can read the main article above, under the section "Switching time display between AM/PM and 24 hour mode".

    ReplyDelete
    Replies
    1. Andie GalDecember 5, 2019 at 10:51 AM

      Thank you for your quick response. My confusion is Normal Time Mode. I tried the above but no luck. My guess is my watch is in whatever other Mode is available and I do not know how to get it to Normal Time Mode

      Delete
  14. UnknownJanuary 7, 2020 at 3:05 PM

    Dank you very much!!!!!!!
    Greetings from Austria

    ReplyDelete
  15. adminusApril 18, 2020 at 6:51 PM

    Thanks so much. This is very helpful

    ReplyDelete
  16. Martim TimóteoJuly 23, 2020 at 4:13 PM

    Dá para desligar e voltar a ligar

    ReplyDelete
  17. UnknownDecember 24, 2020 at 11:49 AM

    muchas gracias amigo esta informacio
    n si que me fue util

    ReplyDelete
  18. UnknownJuly 21, 2021 at 8:42 AM

    How do i start this watch, it does not appear to have power. How do i turn this watch on?

    ReplyDelete
  19. Voyager8July 21, 2021 at 9:50 AM

    @Unknown

    I think your watch has run out of battery.

    You just need to replace its internal battery.

    ReplyDelete
  20. AnonymousNovember 26, 2021 at 11:58 PM

    Thanks for instructions the instructions that came with the watch are in Chinese can't make head nor tail of them.

    ReplyDelete
  21. UnknownDecember 31, 2021 at 10:05 PM

    Thank you so much for the instructions 😊 got this watch for my son, but everything was in Chinese 😉😉😉 now it's working properly!

    ReplyDelete
  22. UnknownJanuary 16, 2022 at 1:16 AM

    My watch won't turn on

    ReplyDelete
  23. Voyager8January 16, 2022 at 2:16 AM

    @Unknown

    Have you tried replace its battery?

    ReplyDelete