Tuesday, April 18, 2017

Instruction manual for S-Sport Coolboss 30m water resistant watch

I have bought an S-Sport Coolboss 30m water resistant watch for my small kid. This made in China watch cost only RM11 at online store.

It is splash proof but not water proof, which means it can resist rain water, but cannot be worn for diving.


This watch has 4 buttons:
  • L: Light
  • M: Mode
  • S: Start
  • R: Reset
It is pretty tricky to set the watch without referring to the instruction manual, and that manual is just a piece of paper.

I am copying down its important instruction here, just in case the paper cannot be found in the future. If you also have this watch (or similar Coolboss watches) and you lost its instruction manual, you can bookmark this page and come back to here for future reference.

Displaying the date:
  • In Normal Time mode, just press the "S" button to display current date.
Displaying the alarm time:
  • In Normal Time mode, just press the "R" button to show the alarm time currently set.
Switching time display between AM/PM and 24 hour mode:
  • In Normal Time mode, press "M" button 3 times to enter Time Adjustment mode.
  • Then, press "R" button 2 times to enter Hour Display Adjustment mode.
  • Press the "S" button to adjust the hour digit and the desired time display mode.
  • When finished, press "M" to return to Normal Time mode.
Adjusting the time:
  • In Normal Time mode, press "M" button 3 times to enter Time Adjustment mode.
  • When the second figure is blinking, press "S" to adjust the second value.
  • Press "R" to make the minute figure blinks, then press "S" to adjust the minute value.
  • Pressing "R" continuously will switch among the hour, day, month and weekday value to be adjusted. Use the "S" button to adjust the blinking figure.
  • Press "M" to return to Normal Time mode.
Setting the alarm time:
  • In Normal Time mode, press "M" 2 times to enter Alarm Adjustment mode.
  • Use the "R" button to toggle between hour and minute figure.
  • Use the "S" button to adjust the blinking figure.
  • Press "M" to return to Normal Time mode.
Using the stopwatch:
  • In Normal Time mode, press "M" 1 time to enter Stopwatch Function.
  • Press "S" button to start the stopwatch. Press "S" button again to stop the stopwatch.
  • Press "R" button to reset the stopwatch.
  • Press "M" to return to Normal Time mode.
Turn hourly chime on/off:
  • In Normal Time mode, press and hold the "R" button.
  • While holding the "R" button, press "M" button to toggle hourly chime on/off. When it is on, all the weekdays on top of the screen will have black background.
Turn alarm on/off:
  • In Normal Time mode, press and hold the "R" button.
  • While holding the "R" button, press "S" button to toggle alarm on/off. When it is on, the alarm indicator at the bottom will be shown.
Alarm snooze and stop:
  • When the alarm is chiming, press "S" button to snooze. The alarm will chime again after 5 minutes.
  • When the alarm is chiming, press "R" button to stop it.
Cold light lamp:
  • Press the "L" button, the cold light will be on for 3 seconds.

26 comments:

Unknown said... Reply To This Comment

omg thx i was using a different watch and the instructions still worked wow

Martin said... Reply To This Comment

Awesome. Thanks for this. I've been annoyed by the alarm fir a week, didn't know how to turn off

Anonymous said... Reply To This Comment

my watch doesnt change any of the time on normal watch mode when following your instructions

Katarinah said... Reply To This Comment

A lot of thanks! Also been annoyed by the alarm for a long time and couldnt figure out how to turn it off.

Unknown said... Reply To This Comment

thanks!!

Unknown said... Reply To This Comment

Bookmarked!!!
(Same instructions, different model)

Unknown said... Reply To This Comment

I can show the date and month, but how do I change the date? Help, please!

Unknown said... Reply To This Comment

Also, I've just discovered, if you hold the L button for more than 3 seconds, you can change the colour of the light! You can set this to Blue, Red, Green, Light blue, Yellow, or multicoloured!

Moon Girl 🧕🏻🌙✨ said... Reply To This Comment

Press M, or mode, 3 times. Then do the same with R, or reset. It should show you the date. To change the date, just press start until the correct day. For the month, press restart then start to change it. Press restart one more time to change the day of the week. (press start to change it). Sorry if this makes no sense, but it works for me. Hope you figure it out!

Unknown said... Reply To This Comment

Obrigada tenks

Tony maxx said... Reply To This Comment

best procedures ever...i was already being frustrated...but this procedures worded like magic...great thanks

tarzan said... Reply To This Comment

Does anyone know where I can get a replacement buckle loop for my Honhx watch? That's the only problem I've had with the watch so far, the buckle keeps falling apart.

Andie Gal said... Reply To This Comment

Thank you for the instructions. My watch is stuck in Army time, how do I get it back to Normal time?

Voyager8 said... Reply To This Comment

@Andie Gal

You can read the main article above, under the section "Switching time display between AM/PM and 24 hour mode".

Andie Gal said... Reply To This Comment

Thank you for your quick response. My confusion is Normal Time Mode. I tried the above but no luck. My guess is my watch is in whatever other Mode is available and I do not know how to get it to Normal Time Mode

Unknown said... Reply To This Comment

Dank you very much!!!!!!!
Greetings from Austria

adminus said... Reply To This Comment

Thanks so much. This is very helpful

Martim Timóteo said... Reply To This Comment

Dá para desligar e voltar a ligar

Unknown said... Reply To This Comment

muchas gracias amigo esta informacio
n si que me fue util

Unknown said... Reply To This Comment

How do i start this watch, it does not appear to have power. How do i turn this watch on?

Voyager8 said... Reply To This Comment

@Unknown

I think your watch has run out of battery.

You just need to replace its internal battery.

Anonymous said... Reply To This Comment

Thanks for instructions the instructions that came with the watch are in Chinese can't make head nor tail of them.

Unknown said... Reply To This Comment

Thank you so much for the instructions 😊 got this watch for my son, but everything was in Chinese 😉😉😉 now it's working properly!

Unknown said... Reply To This Comment

My watch won't turn on

Voyager8 said... Reply To This Comment

@Unknown

Have you tried replace its battery?

Abe said... Reply To This Comment

Thank you for this! Mine has violet as well!

Can anyone tell me which size wrist band this watch uses? If like to replace the rubber wrist band with a canvas one. Thanks.

Post a Comment

Hint: Click on the "Older Posts" link to continue reading, or click here for a listing of all my past 3 months articles.