Friday, December 29, 2017

My SUM 0026 digital programmable timer 3-pin plug socket

Electrical programmable timer plug socket is very useful for you to automate the time to turn off a particular electrical/electronic appliance, and the time to turn it on again.

Some of its usage scenario including:

  • Switching off your WiFi at mid-night and switching it on again in early morning.
  • Switching off your television and set-top-box at mid-night and switching them on again the next morning.
  • Switching on water sprinkler system in your garden at certain hour everyday, and switching it off again after some times.
  • Switching on night lights at night and switching them off during day time.
  • Charge the BC-01 multimedia Bluetooth speaker with alarm clock and FM radio for 2 hours everyday.

Typically, there are 2 types of electrical programmable timer plug socket: mechanical and digital. Mechanical programmable timer is usually cheaper, but has limitation of 24 hours single setting only. Digital programmable timer such as this SUM 0026 supports 7-days on/off setting and can accommodate up to 10 different on/off settings.


This SUM 0026 digital programmable timer 3-pin plug socket is certified by SIRIM with a SIRIM sticker.

It has an internal NiMH 1.2V battery which is able to remember its clock time and settings for more than 100 hours even when their is no power supplied to the unit.

Before you can use it for the first time after unpack, you need to plug it in an electrical socket and charge its internal battery for about half a day. Initially, you might see its LCD display showing distorted characters. That is normal. After some times, the unit will function well with the correct info display.

After that, you need to reset its memory by pressing the small round Master Clear button with a sharp object for a few seconds, then release it.

Then, you need to set its clock time:
  • Press and hold the Clock button.
  • With Clock button pressed, press the Week button again and again until current day is shown.
  • Continue the same step with the Hour button and Minute button.
  • With Clock button pressed, press the Timer button to toggle between 12 hour and 24 hour clock mode.
To set a timer setting:
  • Press and release the Timer button. The LCD will show ON_1 for the "switch on" time for 1st set of setting.
  • Press the Week button again and again to set the day or block of days for timer on.
  • Repeat the same to set for Hour and Minute.
  • Press and release the Timer button. The LCD will now show OFF_1 for the "switch off" time for 1st set of setting.
  • Set the timer off settings for Week, Hour and Minute respectively.
  • Note: timer on can be either earlier or later than timer off.
  • Press the Clock button to exit from timer setting mode.
To use the timer function, you need to press the On/Auto/Off button until you see Auto displayed on the screen. When it is in On position, device plugged into it will always turned on; when it is in Off position, device plugged into it will always turned off.

There is a Random button, which will randomly pick a time between 6pm and 6am.

Note that this SUM 0026 digital programmable timer 3-pin plug socket has a maximum load of 13A and 3.12 kW.

Sunday, December 24, 2017

Blackmores Multivitamins plus Minerals tablets as gift and also for self consume

During this multiple-festive season of year-end, Christmas and new year, if you are wondering about what to give as gift to relatives and friends, perhaps you can consider health supplement such as Blackmores Multivitamins plus Minerals tablets.

Blackmores is named after its Australian founder Maurice Blackmore (1906-1977). The company (ASX:BKL) is public listed in Australia Stock Exchange since 1985. They are passionate about natural health and inspiring people to take control of and invest in well-being.

Blackmores Multivitamins plus Minerals tablet contains essential vitamins and minerals to provide your body and mind with all-round nutritional support and help maintain health every day. It helps supplement an unbalanced diet in one-a-day dose. Its active ingredient includes:

  • Vitamin A
  • Vitamin B1
  • Vitamin B2
  • Vitamin B3
  • Vitamin B5
  • Vitamin B6
  • Vitamin B12
  • Vitamin C
  • Vitamin D3
  • Vitamin E
  • Calcium
  • Choline bitartrate
  • Iron
  • Folic acid
  • Inositol
  • Manganese
  • Magnesium
  • Potassium
  • Zinc
  • Biotin

Daily supplementation with a broad range of vitamins and minerals can provide "nutritional insurance" by helping to provide an optimum intake for the maintenance of good health. A Harvard review published in the Journal of the American Medical Association in 2002 recommended that all adults should take a multivitamin daily. Statistics suggest that many people are not consuming optimal amounts of vitamins in their diets. Low levels of vitamins can contribute to the development of a range of conditions.

The most cost effective Blackmores Multivitamins plus Minerals is the gift pack as below, which consists of 1 bottle of 120 tablets, 1 bottle of 60 tablets, and 1 bottle of 30 tablets. Altogether there are 210 tablets in one pack. The price I bought is RM78.90, which is 37.57 sen per tablet.


The shelf life of this product is 3 years. Its manufacturing date and expiry date is printed on its label.

This product is formulated for adults to take one tablet per day. For children under 12 years old, there is another product called Blackmores Kids Multivitamins plus Minerals.

Blackmores Kids Multivitamins plus Minerals has the following active ingredient:
  • Vitamin A
  • Vitamin B1
  • Vitamin B5
  • Vitamin B6
  • Vitamin B12
  • Vitamin C
  • Vitamin D3
  • Vitamin E
  • Equiv. Thiamine
  • Nicotinamide
  • Folic Acid
  • Biotin
  • Calcium
  • Iodine
  • Magnesium
  • Manganese
  • Zinc
Blackmores Kids Multivitamins plus Minerals tablets are chewable with strawberry vanilla flavour with no artificial sweeteners, and not to be swallowed as whole.

This product is formulated for children of age 2-6 years to take 1 tablet per day, and for children of age 7-12 years to take 2 tablets per day.

The most cost effective Blackmores Kids Multivitamins plus Minerals is the twin pack as below, which consists of 2 bottles of 60 tablets each. Altogether there are 120 tablets in one pack. The price I bought is RM51.95, which is 43.29 sen per tablet.



The genuine products will have a Ministry of Health (Kementerian Kesihatan Malaysia, KKM) hologram sticker with a unique serial number for each bottle.


For the Muslim, this product is certified Halal by the Al-Iman Islamic Society Inc. of Australia as shown in the logo on its label.

Friday, December 22, 2017

SSPN-i tax relief of RM6000 max has been extended until year 2020

You might be awared that the National Education Savings Scheme (Skim Simpanan Pendidikan Nasional, SSPN-i) setup by the National Higher Education Fund Corporation (Perbadanan Tabung Pendidikan Tinggi Nasional, PTPTN) for the purpose of higher education is able to provide you personal income tax saving, which is one of the good personal finance means for resident individuals to reduce their payable income tax.


The maximum amount of personal income tax relief for new saving deposits placed in SSPN-i for the benefit of your children during each year of assessment is RM3,000. This mean if your children's SSPN-i account is deposited with RM3,000 additional savings (new deposit - withdrawal = RM3,000) in the year, you can deduct your taxable income for the year by the same amount of RM3,000.

If the additional savings during the year is less than RM3,000, you can deduct your taxable income for the year by the same amount, which is less than RM3,000.

If the additional savings during the year is more than RM3,000, you can deduct your taxable income for the year by RM3,000 only, as RM3,000 is the maximum.

However, National Budget 2013 had announced that this maximum amount of SSPN-i tax relief be doubled to RM6,000 for a period of 6 years from assessment year 2012 until 2017. The maximum amount will fall back to RM3,000 after 2017.

Now, the good news is, National Budget 2018 announced on 27 October 2017 has further extended  this SSPN-i maximum RM6,000 tax relief period for another 3 years, which will continue from assessment year 2018 until 2020.

This means that the maximum tax relief from SSPN-i new deposits will remain as RM6,000 until assessment year 2020.

Auspicious dates in 2018 for housewarming, open house, party, gathering, etc.

Here is the list of auspicious dates in 2018 for organizing and hosting meet-up with friends and/or relatives (会友), which is produced based on the Chinese almanac Tong Shu.

The dates are applicable for housewarming, open house, home party, gathering, potluck, and any other similar functions to meet up with friends and/or relatives. (Click the image to enlarge)


Bear in mind that although the Tong Shu is a compilation of Chinese astrology and calendaring studies gathering wisdom of thousands of years, we should use it wisely and rationally, but not be too superstitious on it.

Thursday, December 21, 2017

Auspicious dates for baby first haircut (Mundan) in 2018

In many culture, religion and/or tradition, the first haircut of a baby is considered an important milestone for his/her life. The day is known as Mundan, Chadakarana, Halaqah, Upsherin, etc.

Here is the list of auspicious dates for baby first haircut in year 2018, which is produced based on the Chinese almanac Tong Shu. (Click the image to enlarge)


Bear in mind that although the Tong Shu is a compilation of Chinese astrology and calendaring studies gathering wisdom of thousands of years, we should use it wisely and rationally, but not be too superstitious on it.

Auspicious dates in 2018 for getting a baby or childbirth

Here is the list of auspicious dates in 2018 (year of Dog) for getting a baby (求嗣), which is produced based on the Chinese almanac Tong Shu.

The dates have good element(s) to embro/faetus. Traditionally, the dates are referred for conception planning (making love and expecting a baby to the family). Nowadays, people also make reference to them for Caesarian delivery of new born. (Click the image to enlarge)


Bear in mind that although the Tong Shu is a compilation of Chinese astrology and calendaring studies gathering wisdom of thousands of years, we should use it wisely and rationally, but not be too superstitious on it.

Auspicious dates for starting new job / post / assignment in 2018

For employees, especially those in leading/managing position, here is a list of auspicious dates  in 2018 for starting new job/post/assignment, including joining new company or joining new team in existing company.

It can be applied to first day reporting to new company/department/office/position, or going for the post to lead/manage a new business unit/team/project/programme. It can also be applied to assuming new job position after promotion/restructuring/relocation exercise.
It is produced based on the Chinese almanac Tong Shu.


Bear in mind that although the Tong Shu is a compilation of Chinese astrology and calendaring studies gathering wisdom of thousands of years, we should use it wisely and rationally, but not be too superstitious on it.

Wednesday, December 20, 2017

Auspicious dates for marriage proposal or engagement in 2018

Before becoming the life partner, marriage is proposed by lover and engagement is made.

Here is the list of auspicious dates for marriage proposal or engagement in year 2018 (year of Dog), which is produced based on the Chinese almanac Tong Shu. (Click the image to enlarge)


Bear in mind that although the Tong Shu is a compilation of Chinese astrology and calendaring studies gathering wisdom of thousands of years, we should use it wisely and rationally, but not be too superstitious on it.

Auspicious dates in 2018 for signing contract, register for marriage, etc.

Here is the list of auspicious dates in year 2018 for signing contract, signing offer letter, register for marriage, receiving religious baptism, and other similar agreement-related activities.

It is produced based on the Chinese almanac Tong Shu. (Click the image to enlarge)


Bear in mind that although the Tong Shu is a compilation of Chinese astrology and calendaring studies gathering wisdom of thousands of years, we should use it wisely and rationally, but not be too superstitious on it.

Auspicious dates for wedding / marriage in 2019

Many couples plan for their wedding more than 1 year ahead in order to have sufficient preparation time.

Here is the list of auspicious dates for wedding/marriage in year 2019 (year of Boar), which is produced based on the Chinese almanac Tong Shu. (Click the image to enlarge)


Bear in mind that although the Tong Shu is a compilation of Chinese astrology and calendaring studies gathering wisdom of thousands of years, we should use it wisely and rationally, but not be too superstitious on it.

If you are looking for auspicious dates for wedding / marriage in 2018 (year of Dog), click here.

Tuesday, December 19, 2017

Auspicious dates for renovation in 2018

Here is the list of auspicious dates for home or office renovation in year 2018, which is produced based on the Chinese almanac Tong Shu. (Click the image to enlarge)


Bear in mind that although the Tong Shu is a compilation of Chinese astrology and calendaring studies gathering wisdom of thousands of years, we should use it wisely and rationally, but not be too superstitious on it.

Auspicious dates for moving to new house / office in 2018

Here is the list of auspicious dates for moving to new house/office in year 2018, which is produced based on the Chinese almanac Tong Shu. (Click the image to enlarge)

 
Bear in mind that although the Tong Shu is a compilation of Chinese astrology and calendaring studies gathering wisdom of thousands of years, we should use it wisely and rationally, but not be too superstitious on it.

Auspicious dates for opening business in 2018

Here is the list of auspicious dates for opening business in year 2018, which is produced based on the Chinese almanac Tong Shu.

It can be applied to new business opening, or reopening of business after a break/holiday. (Click the image to enlarge)



Bear in mind that although the Tong Shu is a compilation of Chinese astrology and calendaring studies gathering wisdom of thousands of years, we should use it wisely and rationally, but not be too superstitious on it.

Monday, December 11, 2017

How to control 2 computers with a single Logitech M585 / M590 mouse and use it to copy-paste file from one computer to another

The Logitech M585 / M590 are multi-device flow wireless mice that can be paired with up to 2 computers at the same time either using the Logitech USB Unifying receiver or using Bluetooth. The main different between them is that M590 is a silent mouse while M585 will still produce click sound like other ordinary mice.

New user of the Logitech M585 / M590 mouse might have difficulty to figure out how to make the pairing with 2 computers, and how to make use of Logitech Flow to seamlessly move the mouse cursor from one computer to another.

This is because so far Logitech does not provide clear step-by-step instruction on how to perform the necessary setting. The printed instruction that comes with the mouse is like this:


Are you able to figure out what does these 7 steps mean?

Anyway, I managed to find out the way to do it by guessing on the above instruction and reading a few articles which scattered around Logitech's website and forum, each of them are like piece of brain teasing puzzle for us to link them together to figure out the ultimate answer.

If you also have a Logitech M585 / M590 mouse, I am going to share with you the know-how here.

There are 2 levels of using this Logitech M595 / M590 mouse in 2 computers:
  • Level 1 - you can pair the mouse with 2 computers at the same time, but using the mouse between them one at a time.
  • Level 2 - you pair the mouse with 2 computers at the same time, using the mouse between them one at a time, but the mouse control can flow seamlessly from one computer to another, and you can copy file from one computer and paste it to the other computer by just using your mouse.

How to setup for Level 1 - sharing one mouse between 2 computers?

Unlike ordinary mice which can only be paired with one computer at one time, your Logitech M585 / M590 mouse can be paired with either one or two computers at the same time.

The different is this:
  • For ordinary mouse, you can only use it in one computer. If you want to use it in another computer, you will need to unplug the USB receiver from the original computer and plug it into the USB port of the other computer. For mouse that works with Bluetooth without the need of USB receiver, you need to perform Bluetooth pairing with the computer before it can be used in that computer. If you want to use it in another computer, you perform the Bluetooth pairing with the mouse again, and the mouse need to forget the Bluetooth pairing of the original computer before able to make a new Bluetooth pairing.
  • For Logitech M595 / M590, it can pair with 2 computers at the same time, and it supports 2 different pairing methods: either using the Logitech Unifying receiver, or using Bluetooth. It is possible to pair with 2 different Logitech Unifying receivers (probably one is the Unifying receiver that comes with the mouse, the other is the Unifying receiver of another Logitech mouse, or you purchased an extra Unifying receiver from Logitech). It is also possible to pair with 1 Logitech Unifying receiver and 1 Bluetooth. It is also possible to pair with 2 different computers, both using Bluetooth respectively, without making use of Unifying receiver. (Note: Bluetooth pairing for Logitech M595 / M590 in Windows 7 is not supported. You can read this article for more detail on the supported operating system.)
Note that on top of the mouse, there are 2 LEDs, one is labelled as "1" and the other labelled as "2". When your mouse is currently working in Computer 1, the green LED 1 will light up. When your mouse is currently working in Computer 2, the green LED 2 will light up. There is a round button for you to switch between Computer 1 and Computer 2. Press one time, the mouse control will switch from Computer 1 to Computer 2, press it again to switch back the mouse control to Computer 1.

By default, the computer that plugged with the Unifying receiver that comes with the mouse is detected as Computer 1. You can also make Computer 2 to use the Unifying receiver of the mouse too.

The way to pair the mouse to Computer 1 and Computer 2 is as below:
  • Switch on the mouse, LED 1 will start to blink slowly. If it found a paired Computer 1, the LED will stop blinking and stay on for a while, then both the LED are off.
  • Press the round button, now LED 2 will blink slowly. If it found a paired Computer 2, the LED will stop blinking and stay on for a while, then both the LED are off.
  • To make a new pairing with Computer 1, long press the round button when LED 1 is on. Then LED 1 will blink faster. At this stage, any paired information for Computer 1 will be forgotten, and it is ready to make a new pairing for Computer 1.
  • To make a new pairing with Computer 2, use the same long press round button method when LED 2 is on.
To pair with a computer using Bluetooth:
  • While the desired LED (either 1 or 2) on the mouse is fast blinking, go to Bluetooth settings in the computer, search for the mouse, and perform the pairing. If you are using laptop, you can control the mouse cursor with your touchpad before your mouse take over its mouse control.
To pair with another Logitech Unifying receiver:
  • You will need to download and install Logitech Unifying Software.
  • Run the Logitech Unifying Software in your computer.
  • Click on the "Advanced..." button.
  • Prepare your mouse for pairing. Either LED 1 or LED 2 should be fast blinking before continue with next step.
  • Now, click the "Pair a New Device" in the Logitech Unifying Software Advanced View window.
  • Follow the instruction on screen to turn off your mouse, and then turn it on again.
  • The pairing should be complete at this step. You should be able to see the name of your mouse under the Unifying Receiver tree listing in Logitech Unifying Software.

If your Unifying receiver is paired with more than one mouse, all the mice can control the mouse cursor on the computer screen. The controlling mouse will have an orange Unifying badge shown in the Unifying receiver tree listing.

If you want to un-pair your old mouse, you can do so in Logitech Unifying Software by selecting the mouse and click the "Un-pair" button. This is optional.

At this stage, Level 1 setup is completed. When both Computer 1 and Computer 2 are turned on and within the wireless range of your mouse, you can switch your mouse to control one of them by pressing the round button. When only one of them is turned on, your mouse works just like other mice do.

The advantage of this Logitech multi-device function is that you only need one mouse for multiple computers. Logitech M585 / M590 supports up to 2 computers. Certain more advanced Logitech multi-device mice such as the M720 Triathlon can support up to 3 computers.

The disadvantage of Level 1 is that the switching of mouse control from one computer to another is not automatic. You need to press the round button. Don't worry, after you completed Level 2 settings, it will be fully automatic.


How to setup for Level 2 - seamlessly flow the mouse between 2 computers?

You need to complete the setting in Level 1 for Computer 1 and Computer 2 before coming to Level 2. Meaning, your mouse must have been paired with 2 computers.

In addition, for Level 2 to work:
  • Both Computer 1 and Computer 2 must be installed with Logitech Options.
  • Network connection can be either wired or wireless. It can be both computers connected using network cable, or one is wired and the other using WiFi, or both using WiFi.
  • Both of them must be connected to the same local area network (LAN). If there are VLAN segmentations, both of them must be in the same VLAN segment.
  • The following network ports must be accessible between them: TCP 443, TCP 59866, UDP 59867 and UDP 59868.
When you are ready:
  • Turn on both Computer 1 and Computer 2.
  • Run Logitech Options in both of them respectively.
  • Go to the Logitech Flow screen in Logitech Options of either one of the computer. It doesn't matter is Computer 1 or Computer 2.
  • Turn on Logitech Flow.
  • The computer will proceed to search for Logitech Flow in the other computer. If successful, the Logitech Flow in the other computer will automatically turned on.
You can see 2 side-by-side rectangles in the Logitech Flow screen. The left rectangle belongs to Computer 1, and the right rectangle belongs to Computer 2. The computer which the mouse is currently controlling will be coloured in cyan.

Click on the three dots at the top right corner of the rectangle, you can see its computer name.


There are options for you to disable or remove it from Logitech Flow operation as shown. If the computer is disabled, you can come back to the same place to re-enable it. If the computer is removed, you need to perform all the steps in this Level 2 to link it back to Logitech Flow.

Note that there are a few settings you can change for Logitech Flow.

Switch between computers:
  • Move to the edge: When your mouse cursor moves beyond the right edge of Computer 1, it will flow to Computer 2. When it moves beyond the left edge of Computer 2, it will flow to Computer 1.
  • Hold Ctrl and move to the edge: This can prevent you from accidentally flow to another computer by requiring you to hold down your keyboard's Ctrl key for the flow to happen.
Screen corners:
  • When enabled, flow will work even at screen corners.
  • When disabled, flow will not work at screen corners. This can prevent you from accidentally flow to another computer when you want to minimize a maximized window and move your mouse cursor to the corner.
Copy and paste:
  • When enabled, you can copy and paste text, images and files from one computer to another.
  • The method is to select the text, images or files in one computer, press Ctrl-C or right click and select Copy action, then flow your mouse control to the other computer, press Ctrl-V or right click and select Paste action.
  • This copy and paste action will lag if the file size is big.
  • Note that direct drag and drop is not supported by Logitech Flow yet.
Now, you can enjoy the wonders of your Logitech M585 / M590 with Logitech Flow.

Sunday, December 10, 2017

My Logitech M590 multi-device silent and flow wireless mouse

One of my wireless mouse started to have the common mouse problem of single click becomes double click. Therefore, I have recently bought a new Logitech M590 multi-device silent and flow wireless mouse.


Despite this Logitech M590 mouse has some advanced features that distinguish it from ordinary mouse, its packaging is not impressive at all. Its price is higher than ordinary mouse too, cost me RM99 to get it.

This Logitech M590 mouse is very identical to its sibling Logitech M585. The main different between them is that, M585 left and right buttons produce loud clicking sound just like other ordinary mice, while M590 left and right buttons are soundless and produce no clicking sound. Its other buttons also produce softer sound than ordinary mice. This is ideal for night owls who share the same room with roommate(s). Now you can use your computer silently at night without disturbing the sleep of your  roommate(s), provided you use this silent mouse together with a silent keyboard.

This mouse operates with a single AA battery, and comes together with a GP alkaline battery. Logitech claims that its battery life can last as long as 24 months (2 years), which is pretty impressive.

Beside the battery compartment, you can find its USB Unifying receiver after opening its back cover. It has an on/off switch at its back for you to lengthen its battery life by switching it off when not in use.


At the back of its packaging paper card, there is instruction on low to setup to link it with 2 computers using Logitech Flow, which I find is not very useful because it is very difficult to understand. It is only a 7 steps diagram without any explanation words!


Anyhow, I managed to figure out how Logitech Flow works and how to switch the mouse between 2 computers and use its feature to copy-and-paste clipboard content and files from one computer to another, which I will explain in detail in my next posting.

This mouse comes with 1 year warranty, and you can register it in this webpage.


After registration, you can proceed to download Logitech Options, the software for you to configure this Logitech M590 mouse. The Logitech Flow function is inside this Logitech Options.


In fact, after you plugged its Unifying receiver into your computer's USB port, switch on the mouse and turn on your computer, after you successfully logged in Windows, the system will automatically prompt you to download and install Logitech Options.

However, the installation of Logitech Options was not smooth. I have tried in more than one computers. The installation process of Logitech Options will take a very long time, and I only managed to get it successfully installed after I terminated its installation after 10 minutes, and run the installation program again. The installation will magically complete within 2 minutes during the second attempt.


Therefore, you need to download the installer from the above Logitech webpage, for you to perform the second attempt of installation, or you will need to spend unnecessary time and effort to locate the installer file used by the automatic installation process, which stays somewhere deep inside your hard disk.

This Logitech M590 mouse has altogether 6 buttons, as shown in the Logitech Options screen below. The middle button is used to switch between Computer 1 and Computer 2, which you cannot configure for other function. The other 5 buttons which are circled in the Logitech Options screen can be configured to have function according to your personal preference.


You just need to click on the circle, and after that select your preferred function from the menu.


In the Point & Scroll screen, you can set the mouse pointer speed, enable/disable smooth scrolling, and set the scroll wheel direction.


The Flow screen is where you configure the Logitech Flow function. There are 2 rectangles on the screen, the left one is your Computer 1, and the right one is your Computer 2. Once Logitech Flow is up and running, the mouse can seamlessly flow from the screen of one computer to another.


I will explain how to setup Logitech Flow in my next posting.

Beside pairing with its Unifying receiver, this Logitech M590 mouse can also paired with the Bluetooth receiver of your computer or tablet that supports low energy technology. Supported operating system for Bluetooth pairing includes:
  • Windows 8 or Windows 10 or later
  • Mac OS X 10.10 or later
  • Chrome OS
  • Android 5.0 or later
This is useful if you want to use Logitech Flow with 2 computers, but you only have 1 Unifying receiver that comes with the mouse.

If you have another Logitech mouse with Unifying receiver, you can use the Logitech Unifying Software to link this Logitech M590 with the Unifying receiver of the other mouse, as the Unifying receiver can support up to 6 Logitech devices. I will explain how to link Logitech M590 with another Unifying receiver in my next posting.

If your Unifying receiver is linked with more than one mouse, both the mice can control your mouse cursor on the screen at the same time.



If you plan to buy this Logitech M590 wireless mouse, here are some "catches" that you need to consider before making your decision:
  • This mouse can work in Windows 7, but it cannot be connected with Bluetooth to Windows 7 computer. In addition, Windows 7 might have problem recognizing the Logitech Unifying receiver that comes together with the Logitech M590 mouse. Anyhow, it can still function as a mouse in Windows 7 with its Unifying receiver,  despite with these imperfectness. Therefore, it is more advisable to use this mouse in Windows 8 or above. I haven't tested this mouse in Linux or Mac computer though. It should be able to work with Linux Kernel 2.6+, Chrome OS, and Mac OS X 10.10 or later.
  • This mouse does not come with Logitech Darkfield technology and will have difficulty working on glass surface. If you need this feature, can consider the Logitech MX Anywhere 2S mouse, which price is more than double to this Logitech M590.


Friday, December 8, 2017

Automate Flow: Auto enable Bluetooth to connect to car hands-free when you are driving, else disable Bluetooth

This is an example of Automate flow. To learn more about Automate for Android phones, click here.

It is always a good idea to disable the Bluetooth function of your Android phone until you want to pair it with another Bluetooth device, such as hands-free system, GPS, audio speaker, input device (keyboard, mouse, gamepad, ...), etc. This will help to conserve some battery usage of your phone.

However, if you are always wearing a Bluetooth smartwatch that paired with your smartphone, you will need to let the Bluetooth function of your phone to always stay on. In that case, this Automate flow might not be so relevant for your need.

Nowadays, driving laws in many places in the world prohibit holding your phone in your hand while driving. If you are caught with that, you could be imposed with penalty and fine. Therefore, you need a hands-free system to answer to phone calls while driving. Many modern cars already have built-in hands-free function in their audio system. Certain automotive GPS device such as Garmin DriveAssist, Garmin DriveSmart, etc. is also able to link with your smartphone through Bluetooth to provide hands-free and some other additional functions.

Well, if you always disable Bluetooth of your Android phone and manually enable it whenever you want to pair it with a Bluetooth device, it would be very tedious if you are a frequent driver. You will need to enable Bluetooth whenever you sit in your vehicle and started its engine, and disable Blueooth whenever you parked your vehicle and stopped its engine, otherwise you will not be able to use the hands-free function. This Automate flow will help you to automatically perform those action.

In addition, normally when we are in a vehicle on the road, there is no WiFi available. This flow will also help you to disable WiFi when it detected you are travelling in a vehicle. You can edit the flow and remove the "Disable WiFi" block in it if your vehicle does provide WiFi connection that you want to use.


The flow begins with a block to stay and wait until it detected your Android phone carried along with you is travelling in a vehicle. This is a very interesting Automate block. Beside "in vehicle", it can also detect whether you or your phone is:
  • On bicycle
  • On foot
  • Running
  • Still
  • Tilting
  • Walking
  • Unknown
It makes use of sensors of your phone to perform the guessing, and report back with a confidence level. The "in vehicle" block setting of the above flow is as below:

The flow will continue its further actions when it is at least 85% sure that you are in a vehicle. The detection interval is set at 2 minutes. If you want the flow to react faster, you can shorten this detection interval, but it might drain more battery at the same time.

Once it detected you are in a vehicle, it will disable WiFi function of your phone (Block 3).

It will then detect whether the battery level of your phone is above 30%. If it is below, whether your phone is plugged to a power source for charging. If both conditions are negative, it will disable Bluetooth and do nothing. I put 30% battery level as this should be sufficient to keep your phone on with Bluetooth paired for quite a long journey. You can adjust this minimum battery level requirement in Block 14 according to your situation. If your driving distance is most of the time pretty short, probably 15% minimum is good enough for you.

If battery level is OK, it will proceed to enable Bluetooth, wait for 10 seconds for your phone to pair with the Bluetooth device in the vehicle (which as a prerequisite, they must be successfully paired before), such as your car audio system hands-free, or your GPS. If the pairing is successful, it will keep the Bluetooth connection until it is disconnected. Disconnection will happen when your car audio system is switched off (when car engine turned off), or when you manually disable your phone Bluetooth function (in case you do not intend to use hands-free during that journey. For example, you are a passenger in your own car which one of your family member is driving for that trip).

It will wait for 3 minutes before going back to detect whether you are in a vehicle again. 3 minutes is a reasonable minimum time interval for you to leave your car and then to drive it again. That will be the estimated time to stop the car engine, pump the petrol, and resume driving. For other occasions, probably the interval is much longer. You can edit Block 13 to change this interval shorter or longer to suit your need too.

In the event Bluetooth pairing failed after the Bluetooth is enabled, you are very likely to be not in your own car, but in another vehicle either as passenger or driver. Since the hands-free function is not available to you in that vehicle, the flow will proceed to disable Bluetooth and wait for a longer 30 minutes (which you can edit Block 20 to change it to be shorter or longer). 30 minutes is an estimation that you will probably won't drive in your own car, since you are travelling in another vehicle at that moment.

In fact, you can remove both Block 13 and Block 20 and immediately go back to activity checking if you want. The 2 delay blocks are merely for the flow to take a break (and save some battery).

Thursday, December 7, 2017

Automate Flow: Auto enable WiFi when you arrive home and disable WiFi when you leave home

This is an example of Automate flow. To learn more about Automate for Android phones, click here.

It is always a good idea to disable the WiFi function of your Android phone until you want to connect to a WiFi network. This will help to conserve battery usage, and also prevent your phone from automatically get connected to certain open WiFi without your aware, which might be used to hack in your phone.

Normally, there are fix places with WiFi that you will definitely want to use, to conserve your mobile Internet data quota usage. Those places include your home and/or your work place.

This Automate flow will help you to automatically disable WiFi function of your phone after your leave your home, and automatically enable it back when you arrive your home. It will even inform you by voice so that you are aware when WiFi is automatically enabled and disabled by this flow.


Enabling WiFi function does not guarantee a successful connection, because sometimes your access point (AP) or wireless router might have problem in establishing the WiFi connection.

Therefore, after enabling WiFi, this flow will wait for 10 seconds, which should be long enough for normal WiFi connection to be established. It will then check if the connection is successful or not.

If the connection is successful, it will log down the name a.k.a. SSID (service set identifier) of the AP or wireless router your phone has connected to.

If the connection is not successful, it provides option for you to remain enable WiFi or to disable it. Regardless of your selection, you will still need to troubleshoot and find out why the WiFi connection cannot be established. It could be caused by your AP or wireless router is switched off, or hang, or WiFi function disabled, or DHCP IP address allocation full, or other possible issue. If your phone has never made a successful connection with the WiFi at the location before, or you have made your phone "forget" about it, the connection will also be not successful as well.

Before you can use this flow, you need to tell it where is your home. This can be done by tapping on Block 12 "When at location". The following screen will come out.

Tap on the "Pick a location on map..." button to bring out Google map. You can then search for your home by either tapping on the "target" icon if you are currently at home, or by tapping on the search (magnifying glass) icon and key in your home address for search, or by manually selecting the location by navigating the map and tap on the targetted place.


When you are done, tap on the OK button below to capture the location's coordinate.

The Radius setting determines the area that you consider your phone is at home. Normally, 50 meter radius as shown above is a good choice. You can set its value larger so that your WiFi is automatically enabled faster when your approaching home, and automatically disabled after you have travelled further away from your home.

You can use this same flow for other places with fixed WiFi, such as your work place. Just go through the same steps able to set the location before running it. You might also want to change the word from "home" to "office" in Blocks 14, 15, 16 and 17 of the flow.

With slight modification, you can even expand this flow to be used for multiple locations.

Wednesday, December 6, 2017

Automate Flow: Always go back to Home screen whenever phone is unlocked at launcher screen

This is an example of Automate flow. To learn more about Automate for Android phones, click here.

This is a very simple Automate flow with only 4 blocks (including the Flow beginning block).

Most if not all Android launchers support multiple screens for you to organize your apps and widgets into different screen as needed. One of the screens is your Home screen, which normally is where you put your mostly accessed apps and widgets.

When you are at the launcher screen without any opened foreground app, you can always go back to the Home screen by pressing your phone's Home soft key or Home button.

If most of the time, when you unlock your phone and start using it, you want to be at the Home screen regardless of which launcher screen you were at when your phone went to sleep and locked itself, this is exactly what this Automate flow will do.



This flow will wait until you unlock the phone, and check if you are at the launcher screen (meaning, no app is opened at the foreground). If yes, it will emulate pressing the Home button so that you will go to the Home screen automatically.

If you were running an app at the foreground (such as Whatsapp, browser, email, Facebook, etc.) when the screen was last locked, the flow will do nothing and you will return to the app screen after unlock.

In order for this flow to work properly, you need to set the correct launcher app of your phone in the "Is foreground app" block, because different Android phone vendor might provide their own launcher app to the phone. In addition, Android system also allows you to install and use 3rd party launcher app such as Nova launcher, Apex launcher, TSF launcher, etc.


You can tap on the "Pick activity..." button as shown above to select the launcher app you use in your phone.

The setting in the above screen is for Samsung TouchWiz launcher. For HTC phones, set the Package to "com.htc.launcher" and leave the Activity Class as empty field.

What if you never set any screen lock to your phone? In that case, you just need to change the "When device unlocked" block to "When screen is on" block.

Hint: Click on the "Older Posts" link to continue reading, or click here for a listing of all my past 3 months articles.