Instruction manual for S-Sport Coolboss 30m water resistant watch

I have bought an S-Sport Coolboss 30m water resistant watch for my small kid. This made in China watch cost only RM11 at online store.

It is splash proof but not water proof, which means it can resist rain water, but cannot be worn for diving.

This watch has 4 buttons:

• L: Light
• M: Mode
• S: Start
• R: Reset

It is pretty tricky to set the watch without referring to the instruction manual, and that manual is just a piece of paper.

I am copying down its important instruction here, just in case the paper cannot be found in the future. If you also have this watch (or similar Coolboss watches) and you lost its instruction manual, you can bookmark this page and come back to here for future reference.

Displaying the date:

• In Normal Time mode, just press the "S" button to display current date.

Displaying the alarm time:

• In Normal Time mode, just press the "R" button to show the alarm time currently set.

Switching time display between AM/PM and 24 hour mode:

• In Normal Time mode, press "M" button 3 times to enter Time Adjustment mode.
• Then, press "R" button 2 times to enter Hour Display Adjustment mode.
• Press the "S" button to adjust the hour digit and the desired time display mode.
• When finished, press "M" to return to Normal Time mode.

Adjusting the time:

• In Normal Time mode, press "M" button 3 times to enter Time Adjustment mode.
• When the second figure is blinking, press "S" to adjust the second value.
• Press "R" to make the minute figure blinks, then press "S" to adjust the minute value.
• Pressing "R" continuously will switch among the hour, day, month and weekday value to be adjusted. Use the "S" button to adjust the blinking figure.
• Press "M" to return to Normal Time mode.

Setting the alarm time:

• In Normal Time mode, press "M" 2 times to enter Alarm Adjustment mode.
• Use the "R" button to toggle between hour and minute figure.
• Use the "S" button to adjust the blinking figure.
• Press "M" to return to Normal Time mode.

Using the stopwatch:

• In Normal Time mode, press "M" 1 time to enter Stopwatch Function.
• Press "S" button to start the stopwatch. Press "S" button again to stop the stopwatch.
• Press "R" button to reset the stopwatch.
• Press "M" to return to Normal Time mode.

Turn hourly chime on/off:

• In Normal Time mode, press and hold the "R" button.
• While holding the "R" button, press "M" button to toggle hourly chime on/off. When it is on, all the weekdays on top of the screen will have black background.

Turn alarm on/off:

• In Normal Time mode, press and hold the "R" button.
• While holding the "R" button, press "S" button to toggle alarm on/off. When it is on, the alarm indicator at the bottom will be shown.

Alarm snooze and stop:

• When the alarm is chiming, press "S" button to snooze. The alarm will chime again after 5 minutes.
• When the alarm is chiming, press "R" button to stop it.

Cold light lamp:

• Press the "L" button, the cold light will be on for 3 seconds.