Upgraded the firmware of my TP-Link TL-WA860RE 300Mbps WiFi range extender to Version 3.15.8 Build 150820 Rel.40814n

I have just upgraded the firmware of my TP-Link TL-WA860RE 300Mbps WiFi range extender to Version 3.15.8 Build 150820 Rel.40814n.

The most visible enhancement to this new firmware is the addition of Proxy Mode on top of the existing Universal Mode and WDS Mode of operation.

The Proxy Mode is said to have the best compatibility with routers and access points of all brands. If your range extender has problem working in Universal Mode and WDS Mode, you can try using this Proxy Mode. However, it may decrease the overall performance.

Note that you might lost all your existing settings in the TL-WA860RE after the firmware upgrade. Anyhow, there are not much settings for the device, so you can redo all the settings without taking up much of your time and effort.

You can click here to download the firmware for TP-Link TL-WA860RE version 3.15.8.

To perform the upgrade, unzip the downloaded file to get the wa860rev1_en_3_15_8_up_boot(150820).bin file.

Login to the WiFi range extender, and go to System Tools > Firmware Upgrade to perform the upgrade.

I strongly recommend you to connect to the device using a LAN cable instead of connecting through WiFi to perform the firmware upgrade.

Setting up IPv6 in TP-Link TL-WDR3600 router for TM UniFi Internet

IPv6 is finally supported in the latest Malaysian firmware version 3.14.3 Build 150605 Rel.53236n for TP-Link TL-WDR3600 router.

The available IPv6 Internet connection types are:

• DHCPv6
• Static IPv6
• PPPoEv6
• Tunnel 6to4

So far, I only able to make the Tunnel 6to4 work in my router. I am not able to obtain IPv6 address with the other 3 connection types.

Here is the way to setup the TP-Link TL-WDR3600 router to support IPv6 network with TM UniFi, using Tunnel 6to4 method.

Go to IPv6 Support > IPv6 Setup, and enable the IPv6, choose "Tunnel 6to4" as the WAN connection type.

Set the MTU Size to be 1472, which is 20 bytes less than the MTU Size of 1492 set for the IPv4 in PPPoE Advanced Settings page.

To make use of Google DNS servers, set your primary and secondary IPv6 DNS servers to be

2001:4860:4860::8888 and 2001:4860:4860::8844 respectively.

Leave the LAN IPv6 Address Assign Type as SLAAC.

 

Click the Save button and you are done. You should be able to see your IPv6 address and settings in the IPv6 Status page now.

You can test your IPv6 connectivity with this website: http://test-ipv6.com/

Note that you won't be able to get a 10/10 score with Tunnel 6to4 connection. The website will just give you a 7/10. This is absolutely fine, as long as you don't get MTU related error which is the common headache in IPv6 setting.

Next, you can compare your Internet access speed to Japan when using IPv4 and IPv6. Both connection speeds are, in fact, surprisingly very different.

URL to test IPv4 connection speed from your location to the Japan server: http://www.speedtest6.com/

URL to test IPv6 connection speed from your location to the same Japan server: http://ipv6.speedtest6.com/

Below is the ping result from my computer to www.google.com using IPv4 and IPv6:

Upgraded the firmware of my TP-Link TL-WDR3600 router to version 3.14.3 Build 150605 Rel.53236n with UniFi and Maxis Fiber support

I have just upgraded the firmware of my TP-Link TL-WDR3600 router to the latest version 3.14.3 Build 150605 Rel.53236n with UniFi and Maxis Fiber support from the previous Build 130829.

Noticeable new features in this new version of TP-Link TL-WDR3600 router firmware for UniFi and Maxis Fiber high speed broadband are:

1. Guest Network

This feature has been made available to the universal version of firmware for TL-WDR3600 router for quite a long time ago, but is just newly available for its firmware version with UniFi and Maxis Fiber support.

Now, we can provide guest WiFi Internet access to our visitors with a separated SSID and password, and can determine whether the guest connections can communicate with the other hosts (computers, network printers, etc.) in our LAN or not.

We can also restrict the upload and download bandwidth for guest network with bandwidth control.

In addition, we can define the time period that make available the guest network.

We also have an option to allow the guest network to have access to the shared folder in the USB storage device connected to the router, using a separate login and password, with different storage authority.

2. Application Layer Gateway (ALG) for SIP

This is to allow some multimedia clients to communicate across NAT.

3. IPv6 Support

This feature has been made available to the universal version of firmware for TL-WDR3600 router for quite a long time ago, but is just newly available for its firmware version with UniFi and Maxis Fiber support.

You can click here to learn about how I set up IPv6 in this TL-WDR3600 to work with UniFi Internet.

4. New login mechanism

The login mechanism of this new firmware has changed, and seems to be not backward compatible with the older version. You can no longer login the router with your old credential after the firmware upgrade.


You can click here to download the TL-WDR3600 firmware version 3.14.3 with UniFi and Maxis Fiber support.

To perform the upgrade, unzip the downloaded file to get the wdr3600v1_malaysiaVLAN_en_3_14_3_up_boot(150605).bin file.

Login to the router, and go to System Tools > Firmware Upgrade to perform the upgrade.

Important note:

Your router configurations will be reset to default after the firmware upgrade. Therefore, it is extremely important for you to copy down or screen capture all the existing router configurations before performing the upgrade, and reapply all those configuration to the new firmware after the upgrade.

This includes the login and password to the router will be reset to "admin" user with "admin" password, and its IP address reset to 192.168.0.1.

I have tried doing a configuration backup of the old firmware before the upgrade, and restore the backup to the new firmware. This will not work, because you can't login using your previous login and password, probably due to the change in login mechanism.